光纖端面的製備包括剝覆、清潔和切割這幾個環節。合格的光纖端面是熔接的必要條件，端面質量直接影響到熔接質量。

光纖塗面層的剝除

熟練掌握平、穩、快三字剝纖法。「平」，即持纖要平;「穩」，即剝纖鉗要握得穩;「快」，即剝纖要快。

裸纖的清潔

觀察光纖剝除部分的塗覆層是否全部剝除，若有殘留應重剝，如有極少量不易剝除的塗覆層，可用棉球沾適量酒精，邊浸漬，邊逐步擦除。

裸纖的切割

切割是光纖端面製備中最為關鍵的部分，切刀的選擇切刀有手動和電動兩種，但無論選擇哪種都應以精密、優良的切刀為基礎，並嚴格按照操作規範進行。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「光纖端面的製備」的內容，請瀏覽創世官網：http://livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

Stripping of fiber coating

Proficiency in the flat, stable and fast three-word stripping method. "Ping", that is, holding the fiber to be flat; "stable", that is, the stripping pliers should be held firmly; "fast", that is, stripping fiber is faster.

Bare fiber cleaning

Observe whether the coating layer of the fiber stripping part is completely stripped. If there is residue, it should be peeled off. If there is a very small amount of coating layer which is not easy to be stripped, use a cotton ball to dip the amount of alcohol, and while immersing, gradually wipe it off.

Bare fiber cutting

Cutting is the most critical part in the preparation of fiber end faces. The choice of cutters is manual and electric. However, no matter which one is chosen, it should be based on precision and excellent cutters, and strictly in accordance with the operating specifications.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'Preparation of fiber end faces'，please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235