近兩年，智能家居風頭越來越盛，已經迎來了一個火爆的智能家居潮流。那麼，進行智能家居弱電布線設計時需要注意什麼?

智能家居弱電布線設計注意事項

· 局域網系統：局域網是一個星形拓樸結構，任何節點或連接電纜發生故障，都只會影響一個節點。

· 紅外轉發系統：紅外轉發系統的布線可不經過信息接入箱，將各個房間的紅外接收器信號線並聯一起，再通過一組信號線接到紅外發射器。

· AV系統：信息接入箱中採用AV模塊面板，總接入影音中心的AV信號，分接出到各房間，通過面板的撥位開關實現接通或關閉。

· 監控報警系統：各個前端探測器通過綜合布線匯接到信息接入箱里的安防報警抄表信號採集模塊條，再從模塊上接入微電腦報警主機。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「智能家居弱電布線設計注意事項」的內容，請瀏覽創世官網：http://livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

Smart home weak wiring design considerations

· LAN system: The LAN is a star topology. Any node or connection cable failure will only affect one node.

· Infrared forwarding system: The wiring of the infrared forwarding system can connect the infrared receiver signal lines of each room in parallel without passing through the information access box, and then connect to the infrared emitter through a set of signal lines.

· AV system: The AV module panel is used in the information access box, and the AV signal of the audio-visual center is always connected to the room, and is turned on or off through the dial switch of the panel.

· Monitoring and alarm system: Each front-end detector is connected to the security alarm meter reading signal acquisition module bar in the information access box through integrated wiring, and then connected to the microcomputer alarm host from the module.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'Smart home weak wiring design considerations'，please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235