綜合佈線施工過程中要保證零失誤零故障是不可能的事情，但要想把工程故障和失誤降到最低也不是很難做到的事情。

造成通信光纖發生故障的四大原因：

1)雷電衝擊

光纖發生短路或被雷電擊中金屬件時，會發生強大的電流破壞光纖設備，甚至造成人員傷亡。

2)光纖絕緣性欠佳

光纖線路沒有做好絕緣工作，一旦接頭盒出現進水或受潮情況，會減少光纖的運作強度，甚至出現光纖斷裂。

3)外力影響

線路故障很多時候都是受到外力的影響而產生的，而且這種外界因素是無法避免的。

4)線路接頭處故障

線路接頭的地方容易出現故障，日常運作保護工作中減少對接頭盒的依賴，這能降低故障發生的幾率。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「造成通信光纖發生故障的四大原因」的內容，請瀏覽創世官網：http://livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

The four major causes of communication fiber failure:

1) Lightning impact

When a short circuit occurs in an optical fiber or a lightning hits a metal part, a strong current will cause damage to the optical fiber equipment and even result in casualties.

2) Poor insulation of optical fiber

Optical fiber lines do not do the insulation work well. once the joint box is filled with water or moisture, the operating strength of the optical fiber will be reduced, and even the optical fiber will break.

3) Influence of external force

Line faults are often caused by external forces, and this external factor cannot be avoided.

4) Line connector failure

Line joints are prone to failures, and there is less reliance on splice boxes in day-to-day operation protections, which reduces the chance of failure.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'The four major causes of communication fiber failure'，please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235